Graphical RAID configuration using the KVM (iLO) on HP Servers - P410

The personalized RAID configuration allows you to create a RAID mode that can't be created using the management console of (RAID10 for example).

You can do a personalized installation using iLO after the following edit.

Once the server is installed, the ILO button displays.

1. Click iDRAC to start with the creation of the credentials:

2. You are now connected to the webpage of your ILO. Click Java to launch the JAVA applet.

3. Confirm the connection in about two windows (depending your OS)

You are now connected to the KVM. Be cautious when using it.

4. Return to the administration page in your console, click Reboot to restart your server. During the boot process you have to press the CTRL + R keys on your keyboard to launch the RAID configuration utility:

The server will restart.

5. During the boot process, press the F5 key on your keyboard to start the RAID configuration utility:

6. Select the RAID card and the volume and click Delete to delete the logical disk previously created.

7. Once the logical volume is deleted, create a new one. On the same page click Create Array.

8. Select the disks for the RAID, its type and parameters. Once this is done click SAVE

The RAID configuration is done now. Click on Exit ACU at the start page.